Fresan Presses

he FP 80P is the second model in our back-geared range, rated at 80 tons. This is where the ram design steps up to 8 sliding surfaces and motorized ram adjustment, and where a hydraulic overload protector becomes standard for press and die protection. The ram's contact surface is sized to closely match the table, so force is distributed evenly across the die, letting it accommodate larger progressive dies than comparable presses from other manufacturers. With a 0 - 112 mm stroke range and a 600 x 900 mm table, it's built for demanding forming work at heavier tonnage. Like every Fresan press, it's CE marked and built for years of continuous production use. Technical Specifications (FP 80P): - Model: FP 80P - Nominal Force (kN): 800 - Rated Output Distance (mm) (from BDC) (†): 4.0 - Stroke Adjustment (mm): 0 - 112 - Ram Adjustment (mm): 80 - Strokes per Minute (SPM): 60 - Daylight (mm) (††): 400 - Table Dimensions (mm): 600 x 900 - Ram Surface (mm): 470 x 596 - Shank Hole (⌀ mm): 50 - Center Depth (mm) (†††): 300 - Air Pressure (Bar): 4-6 - Weight (kg): 5700 - Table Thickness (mm): 80 - Table Bore (⌀ mm): 90 † Rated output distance from the bottom dead center (BDC) at which the nominal force is reached. †† Daylight: maximum distance between ram and table (ram at uppermost position). ††† Distance from the center of the table to the c-frame.